CHRONOGRAPH SWISS RONDA 5050.C

To set time:

1. Pull crown out to position 3.
2. Turn crown clockwise to correct time.
3. Push crown into 1 for normal position.

To set day:

1. Pull crown out to position 3.
2. Turn crown clockwise to correct day.
3. Push crown into 1 for normal position.

To set date :

1. Pull crown out to position 2.
2. Turn crown clockwise to correct date.
3. Push crown into 1 for normal position.

Chronograph operation:

1. Push button A to start and stop.
2. Push button B to reset.

Split-time chronograph operation:

1. Push button A to start.
2. Push button B for split time.
   You have now measured the first interval of time.
3. Push button B to release split time.
   This is entire period of time. Repeat section 2 for multi-intervals.
4. Push button A to stop.
5. Push button B to reset.

Important fact:

• Do not adjust date wheel between 21:00 and 24:00. The date wheel is fragile and sensitive during
  these time periods, damage can result (Not under warranty).

Subdial functions:

• 2 o'clock position is regular second hand.
• 9 o'clock position is chrono minute and hour.
• 6 o'clock position is chrono 1/10 of a second.
• Large center second hand is chrono second.