CHRONOGRAPH AUTOMATIC SWISS ETA 7750

To set time:

1. Pull crown out to position 3.
2. Turn crown clockwise to correct time.
3. Push crown into 1 for normal position.

To set day and date:

1. Pull crown out to position 2.
2. Turn crown clockwise to advance day.
   Turn crown counter clockwise to advance date.
3. Push crown into 1 for normal position.
   

To activate chronograph:

1. Push button A to start and stop.
2. Push button B to reset.
3. A full rotation of chrono-second accumulates to one
   chrono-minute.
4. A full rotation of chrono-minute accumulates to one chrono-hour.
5. Monte Carlo Swiss 7750 has 12 chrono hours function.

Care and maintenance:

• Automatic movement can be wound by crown or rotor.
• To restart an automatic after a period of not wearing, it is best to manually wind it with approximately 30 turns clockwise.
• Main spring can be damaged by over winding the crown (Not under warranty)
• To use the rotor method for winding, turn watch counter clockwise with watch dial facing you. The rotor will also turn counter clockwise.
• Rotor turns 800 times per day.
• A full charge retains approximately 40 hours of power.

Important fact:

• Do not adjust date wheel between 21:00 and 24:00. The date wheel is fragile and sensitive during  these time periods, damage can result (Not under warranty).