CHRONOGRAPH SWISS ETA

To set time:

1. Pull crown out to position 3.
2. Turn to correct time.
3. Push crown into 1 for normal position.

To set date:

1. Pull crown out to position 2.
2. Turn crown counter-clockwise to correct date.
3. Push crown into 1 for normal position.

Chronograph operation:

1. Push button A to start and stop.
2. Push button B to reset.

Split-time chronograph operation:

1. Push button A to start.
2. Push button B for split time.
   Now you have measured the first interval of time.
3. Push button B to release split time.
   This is the entire period of time.
   Repeat section 2 for multi-intervals.
4. Push button A to stop.
5. Push button B to reset.

To set chrono-second to zero:

1. Pull crown out to position 2.
2. Push button B to advance the chrono-sec
   to center.
3. Push crown into 1 for normal position.

To set split-second to zero:

1. Pull crown out to position 2.
2. Push button A to advance the split-second
   to center.
3. Push crown into 1 for normal position.

To set chrono-minute to zero:

1. Pull crown out to position 3.
2. Push button A to advance the chrono-
   minute to center.
3. Push crown into 1 for normal position.

Important fact:

• Do not adjust date wheel between 21:00 and 24:00.
  The date wheel is fragile and sensitive during these
  time periods, damage can result (Not covered by
  warranty).